Products

Radiation thermometer IPE140/34

Product name

Digital radiation thermometer for plastic film

Model number

IPE140/34

IP140/IPE140 is a fast-response (fastest 1.5msec) full-digital radiation thermometer. The 3.43-micron detecting wave length is used to precisely measure the surface-temperature of ultra-thin (PE) and poly-pylene (PP) films.

Usage

- For measuring the surface temperature of plastic films
  Ideal for temperature-measuring ultrathin polyethylene (PE) films and polypropylene (PP) films.
- Suitable for film surface temperature measurement over 30μm thick.

Features

- For measuring the temperature of samples with severe temperature changes or moving at high speed because of fast response (fastest 1msec)
  Suitable.
  (However, around the lower temperature limit, the response time is automatically extended to reduce noise.)
- Small spot measurement is realized, so even small samples can be measured.
- A LCD indicator is provided so you can check the temperature indication on the main unit.
  Parameters can be set on the main unit.
  Basic measurements can be made only by supplying power.
- The complete digital circuit provides excellent stability and noise immunity.
- Three types of operating focal lenses are available to optimize the spot diameter at any distance.
- The test current output function facilitates connection to an externally installed temperature indicator.
- Data-recording and parameter setting can be performed using the dedicated measurement software (for Windows) provided as a standard-attached product.

Specifications

The position can be checked using the laser beam or direct-view finder.

Measurement accuracy	2.5℃ for temperatures below 400℃ and 0.4% + 1℃ of the measured value for temperatures above 400℃
Temperature range	50 ～ 400℃, 75 ～ 500℃
Detection wavelength	3.43μm

・The interface can also be switched to a RS485 with RS232 and bus-connectivity.