Radiation thermometer ISR12-LO/GS

1. • Lens: Because of the line spot, it is possible to reliably measure even when the workpiece position moves slightly.
     Two focal lengths are available: spot diameter = 100 : 5, 100 : 12
   • Pouring Stream mode can be set
     (This is used to measure the stable temperature when the incoming molten metal passes over the line spot.)
   • Fast Response: 2msec
     (However, near the lower temperature limit, the response time is automatically extended to reduce noise.)
   • Metal mode in addition to 2-color and single-color modes.
     Ideal for measuring metal compounds whose K (ratio correction) value is unknown
   • Small spots: from 17mm×1.6mm
   • High accuracy: ±(0.4% to 0.6% of measured value + 1)℃
     (depending on model and temperature range)
   • Analog/Digital Out: DC4～20mA/DC0～20mA + RS232C/RS485
   • Built-in Maximum Value Holding Circuit: Ideal for measuring moving objects
   • Positioning: Easy positioning with laser pilot light
   • Heat-resistant design for cooling water: Heat-resistant fiber-optic cable at 250℃
   • Data-recording and parameter setting with the attached dedicated measurement software (InfraWin)
   • Easy connection test with externally installed temperature indicator with test current output

5/12/140 Series

Mounting Bracket and Purge Pipe

Please click here for inquiry about radiation thermometer ISR12-LO/GS.